REVOLUTIONARY NEW PRODUCTS FROM GERSAN THE LEADER OF THE SECTOR: G-BUS, LED-BUS, GER-LED…

LIGHTING AND DISPLAY SYSTEMS COMMUNICATING AND BEING CONTROLLED THROUGH POWER LINE (POWER LINE COMMUNICATION) WITHOUT NEEDING DATA CABLE

Paying a serious attention to research and development studies; and so marking its name as inventor of the sector, Gersan Electric has succeeded to develop a new product providing maximum economy, performance, control and ease of application. Obviously, products named as G-Bus, Led-Bus and Gerled, which are under patent protection, will meet the needs of customers compactly and pre-eminently.

In brief, these products, which can communicate, collect and centralise all the record and information including displays through power line without needing data cable; and also provide ease of use and control, present plenty of advantages and benefits. If you please, let’s identify what these products, which were invented by Gersan outdistancing the similar kind of products in the State of Qatar and/or GCC countries, are from the authorities of Gersan…

G-BUS automation system is the GERSAN Smart Bus-Bar Technology interacting through power line which any extra data cable doesn’t needed while controlling the devices connected to the Bus-Bar system. Our system can control devices like open-close, dimming, and open close with time schedule. Automation system includes addressable output plugs, a transmitter modem and the software for the computers.

The plugs include the receiver inside and with this plugs, the electrical devices can be supplied. The receivers get the commands from the energy bus-bar and control the devices with commands. These commands can be open-close, dimming, control of motor-contactor circuit breaker, also can get the feedback communications of heat, humidity, electrical values etc. and repeating the commands.

On a system, the number of the receiver addresses is limited with only the load currents. In software, receivers can group the customers’ needs. Also making scheduled tasks provides energy efficient lighting solutions. The modem takes commands from a server, which can be connected from another computer in local network or over internet connection with user access username and passwords.

We as GERSAN A.S. have added a new technology to our product range with the Ledbus system which provides energy savings with its energy efficiency. The word of Led is used as the abbreviation of Light Emitting Diode. It is one of the light resources which are found as the latest. The fact that it uses a different method than lamps or fluorescents to emit lights and some favourable sides of it have made it a significant issue in today's illumination sector and for this reason Europe and Russia use only led. Ledbus illumination system consists of the integration of G-Bus Industrial automation system and led illumination systems.

Ledbus system has a compact structure where no connection is seen from outside, and which can be realized without using any output plug or lead wire. With internal connection, it can be used with Busbar and it can also be used with normal connection. In our Ledbus products OSRAM and NICHIA Midpower leds are used. Drivers used in the Ledbus units are designed and produced by us. Automation units, Open-Close and Dimming units are also designed and produced by us. Ledbus products provide a more efficient structure to its user with different reflector options. G-BUS Automation system is a patent article of Gersan A.S.

ADVANTAGES

1. All of the light is used.

2. Provides 55 % energy saving.

3. Open-Close durations are very short.

4. They response very fast (200ms)

5. They have long life. They can work approximately for 100.000 hours.

6. Volume of the light can easily be adjusted.

7. Unlike other lamps, it does not contain environmentally hazardous heavy metals such as mercury.

8. It can be connected to the Gersan Lighting Busbar system without the need of any external connections. 9. It can also be used in cabled system upon request of the user.

10. It may be produced in different sized, upon request of the user.

11. It is more efficient compared to the systems which provide equivalent value of light or system which consume equivalent value of energy.

12. It can be produced with different reflector options and in different angles (High Ceiling Armatures)

13. It does not require maintenance.

14. It is environment friendly with low energy consumption and heat release.

15. Due to its structure, it does not produce harmonics.

16. Contributes to energy saving at the ratio of 20-25% by using together with G-Bus Dim units.

LED-BUS

G-BUS + LED = LED-BUS

Important characteristics of our system are it’s having a compact structure and providing a saving up to 55% with energy efficiency. System has a structure which is easier to install compared to fluorescent type armatures. Being highly productive and long-life, working together with G-Bus system which enables all kinds of controls and commands, having a superior optical system which is highly productive and has different light distributions, and flexibility, advantages of the busbar system and its reliability are among the significant properties which put Ledbus unit forward.

GER-LED

Gersan Led street fixture systems, has a compact design structure in which the energy productivity and energy saving are ensured at the highest level. It is an innovative product which is designed by Gersan AŞ. GER-LED smart street lighting system is being formed with the combination of the GER-LED, led and G-Bus.

GER-LED smart street lighting system is an innovative product which as the communication capability which does not need any data cable through the electricity line with G-Bus PLC. No additional cabling is required, because communication (Power Line Communication) is made through the electricity network existing in the system. Because of this reason, it could be applied to all of the presently available systems easily as well. It ensures an installation easiness with the product types which could be mounted on the fixture or the pole. All of the equipment which are used in the GER-LED smart street lighting system could be viewed on a map; and each fixture could be controlled based on the scenarios or interactively.

The scenarios could be formed by means of grouping the fixtures or separately for each fixture. The different applications (opening, closing, dimming, etc.) could be made for each equipment in the scenario part. By means of GER-LED smart street lighting system, it is possible to see the street and the fixture used and applied and also the operation or failure situations could be viewed as well. The maintenance planning could be made according to such information and the saving could be made in the maintenance costs as well. It could be ensured for the related units (maintenance, operation, etc.) to be intervened in the system at the required places thanks to the reporting and user authorization characteristics of GER-LED smart street lighting system.

Our GER-LED smart street lighting system communicates through GSM or modem with the modules which are placed on the lighting boards in the field. The modules which are placed in the field lighting board are appropriate not only for one-phase but also for three-phase networks. A G-BUS RECEIVER is connected to each fixture for the purpose of ensuring the system integrity and each equipment could be controlled through the GER-LED smart street lighting system as well. Thanks to the capability of operation alone even if the connection is interrupted with the G-Bus Server program of the equipment, it is ensured to work effectively without encountering any problem in the operation of the system. It is possible to view the road situation instantly by means of establishing connection remotely to the fixture with the IP camera feature which takes part in GER-LED smart street lighting system.

You could use the energy more productively by means of the movement/ action, humidity and temperature sensor taking part in GER-LED smart street lighting system. Thanks to such features, it is possible to get remote connection to the fixture and to report the environment situation values instantly.

They are produced in the structure to provide 50-60% energy saving in comparison with the systems which give equal lights or the systems which consume equal energies. It has the feature to respond to the On-Off periods very rapidly (200ms). The led with the highest productivities and in most advantageous cover is used in the market as led. Minimum 100.000 hours of LM reports should be able to be given for led. The number of leds that are used in the led design does not exceed 50.

The most effective working period is caught for the Ger-Led and different brands of drivers for the drivers. The driver should be produced in IP67 protection class. The driver could be operated in the environment of -35 to +80. The driver is in a structure to be driven with the fixed current. The driver power factor (PFC) should be designed as 1.

LET’S TALK ABOUT GER-LED STREET FIXTURE TECHNICAL CHARACTERISTICS

The driver should be produced in a structure not producing any noise signal and in an appropriate structure which is resistant to the EMC resistance. The driver output is produced in the dimmable level and with short circuit protection. It has the capability to perform the monitoring, opening, closing and dimming functions with RF communication at the same time and by means of making dual communication through the electricity line by means of using the present electricity substructure without any need of any data cable in any manner.

It has remote control capability through GSM communication. It has IP camera feature. The environment could be monitored remotely whenever required. It ensures following the values of the weather conditions instantly with the humidity and temperature sensor feature as well.

It plays a more effective role on the subject of energy productivity with the movement and sunlight sensors. There is no heavy metal which is dangerous to the environment such as mercury existing in the other lamps in its structure. They could be produced with the different colour options according to the user requests. The led and the driver have practical socket structure which could be assembled and disassembled. The body console has the assembly structure in different angles.

The body has the feature of hanging with different options (hanging, leaning to the wall, etc.) It should have a structure which does not require any maintenance work. The weight of the fixture casing should not exceed 9 kg at maximum. The fixture casing is produced in the IP67 protection class. It has a band-free socket system without any screw and without solder with multi contacts, ensuring the connection easiness with the standard 50cm rubber insulated output cable. The led part is produced independently from the driver section in the fixture, in the body structure. It has a single part aluminium injection body having thermal designed cooling block and high heat transmission.

The tempered glass which is resistant to the pressure and high temperature, plexi glass and single-piece optic lens in IP67 class is used. It should have stainless assembly accessories and screws. It is used as electrostatic painted coated having the Nano technology which is resistant to the atmospheric conditions, with the surface process already made. It could be produced in different angles and design reflectors, having the high light reflection characteristics.

It is guaranteed with the product liability insurance by the producer company. It should be produced as domestic manufacturing work in compliance with TS EN 60598-1 and TS EN 605982-3 standards, ISO9001, ISO14001 and ISO18001 quality standards.